HP Netserver AA Solution Administrator's Guide v4.0 SP1

4-16 HP Netserver AA Solution Administrator’s Guide
Display and Control Window
The Display and Control window displays the commands, options, and parameters that enable
you to manage and display information about your Endurance server.
Note: For Endurance server command information, refer to Chapter 5.
You can access the Display and Control window by:
• Choosing Tools Display and Control from the Endurance Manager menu bar. By
default, this enables you to manage all components of the Endurance server.
• Double-clicking on an Endurance server component in the Administration Window. This
applies a filter to the Display and Control window. Accessing commands using this
method displays only the commands that are relevant to the selected component. For
example, double-clicking on an Ethernet connection displays only Ethernet commands.
A Display and Control window is shown in Figure 4-5 and described in Table 4-8.
Figure 4-5 Display and Control Window