HP Netserver AA Solution Administrator's Guide v4.0 SP1

Commands 5-9
CE1 or CE2 Commands
The CE1 or CE2 commands perform operations on the CE. Table 5-3 lists the CE1 or CE2
commands.
Note: The only CE operating system command is the CE_O/S Shutdown command,
described on page 5-18.
Table 5-3 CE1 or CE2 Commands
Command Page
CE Disable Auto Boot 5-10
CE Disable Auto Synch 5-11
CE Disable Operation 5-12
CE Enable Auto Boot 5-13
CE Enable Auto Synch 5-13
CE Enable Operation 5-14
CE Remove From Configuration 5-14
CE Show Auto Boot 5-15
CE Show Auto Synch 5-16
CE Show Parameters 5-16