HP Netserver AA Solution Administrator's Guide v4.0 SP1

Commands 5-11

CE Disable Auto Synch

This command disables Auto Synch for a specific CE. Auto Synch allows the second CE to

automatically attempt to synchronize with the running CE. If you disable Auto Synch, you

cannot synchronize that CE into the Endurance server until you issue a CE Enable Auto Synch

command. If you are setting this option to prevent a CE from joining the Endurance server

configuration, make sure that you disable both Auto Boot (page 5-10) and Auto Synch on that

CE.

By default, Auto Synch is true (enabled).

Command CEn Disable Auto Synch From IOPx

Console Syntax MTCCONS CEn Disable Auto Synch From IOPx

Variables

n – the ID number of the CE (1 or 2)

x – the ID number of the IOP (1 or 2)

Results To verify that Auto Synch is disabled for CEn, issue a CEn Show Auto Synch

or CEn Show Parameters command from either IOP.