HP Netserver AA Solution Installation Guide v4.0 SP1

Installing the Hardware 2-5
Continue with Cabling the Endurance Server.
9 Specify the identity of the MIC. The MIC BIOS Utility starts automatically
whenever the MIC does not have an identity
setting. Refer to Chapter 7 in the HP Netserver
AA Solution Administrator’s Guide.
Specify CE1 or CE2 to correspond with the
intended role of the CE you are building.
10 Insert your MIC utilities diskette in the
floppy drive, and restart the CE.
11 Run MTCFLASH to update the MIC
firmware: type MTCFLASH -f.
Warning: Once you start MTCFLASH, it must
run to completion without
interruption.
For more information about this utility, refer to
Chapter 7 of the HP Netserver AA Solution
Administrator’s Guide.
12 Remove the MIC utilities diskette.
Step Action Notes