HP Netserver AA Solution Installation Guide v4.0 SP1

Installing the Hardware 2-9
Completing Hardware Installation
To complete the hardware installation:
Continue with Chapter 3, Installing Windows and the Endurance Software.
Step Action Notes
1 Power on the CEs and IOPs.
2 Verify that the MIC hardware is
operating properly by running the MIC
Client and Server Connectivity Tests
from the MIC BIOS Utility on each IOP
and CE.
Depending on the distance between the tuples,
completing these tests may require two people,
one at each tuple.
You need a keyboard and monitor on the IOP
and the CE to run tests in the MIC BIOS Utility.
For MIC BIOS Utility information, refer to
Chapter 7 of the HP Netserver AA Solution
Administrator’s Guide.