HP Netserver AA Solution Installation Guide v4.0 SP1
Table Of Contents
- Contents
- Tables
- Figures
- Preface
- Preparing for the Installation
- Installing the Hardware
- Installing Windows and the Endurance Software
- Adding a KVM or Video Switch to the Hardware
- Index
Installing Windows and the Endurance Software 3-9
Enabling NetBEUI
For maintenance purposes, you can enable a networking protocol for communication between
the IOPs (IL adapter), or an IOP and a CE (Virtual Network adapter). NetBEUI is adequate for
this purpose. If you do not want to use NetBEUI, use TCP/IP for this purpose.
By default, the Windows installation only installs the TCP/IP protocol. In order to use NetBEUI
over the IOP Link or Virtual Network, you must install it. If you do not want to use NetBEUI,
do not install it.
To install NetBEUI, follow these steps:
Continue with Installing Network Software on the IOPs.
Step Action
1 Right click on My Network Places on the desktop, and select Properties.
2 Right click on any configured adapter, and select Properties.
3 Click Install, Protocol, Add, then select NetBEUI.