HP Netserver AA Solution Installation Guide v4.0 SP1

3-16 HP Netserver AA Solution Installation Guide
Continue with Using the Endurance Configuration Utility to Configure Redirected Devices.
Using the Endurance Configuration Utility to Configure Redirected Devices
To configure the redirected devices, follow these steps:
Step Action Notes
When configuring IOP1:
1
Click Start Programs Marathon
Endurance Endurance Configuration Utility.
Figure 3-5 Endurance Configuration Utility
For detailed information about using the
Endurance Configuration Utility, see
Chapter 6 in the HP Netserver AA
Solution Administrator’s Guide.
2 Use the Endurance Configuration Utility to define all
devices that will be redirected from the IOPs to the
CE.
The Endurance configuration data for
both IOPs must be identical except for
Ethernet addresses.
To properly define your configuration,
you must define all devices that are
available to the CE operating system.
This includes mirrored disk sets (two
disks containing identical data and
residing on separate IOPs), non-
mirrored devices (tape drives, CD-ROM
drives, or non-mirrored disks) from both
IOP1 and IOP2, and network adapters.