HP Netserver AA Solution Installation Guide v4.0 SP1

3-22 HP Netserver AA Solution Installation Guide
Installing Software on IOP2
To install the Windows and Endurance software on IOP2:
Continue with Ensuring that IOP1 and IOP2 Join.
Ensuring that IOP1 and IOP2 Join
After completing all installation tasks for IOP1 and IOP2, ensure that the IOPs join.
Continue with Installing Windows and Endurance Software on the CE.
Step Action Notes
1
Return to Step 1 in the section
Installing Windows
on the IOPs
on page 3-4.
2 Complete all the included tasks through Verifying the
Proper Configuration of the IOP Link Adapters on page
page 3-21.
Substitute references to IOP1
with IOP2 when completing these
tasks.
Step Action Notes
1 Boot both IOPs in Operational Endurance I/O
Processor Mode.
2
Click Start Programs Marathon
Endurance Endurance Manager,
and use the
Endurance Manager on IOP1 to make sure both
IOPs and all IOP devices come online.
• Network rails are dark green.
• Disk sources of mirror copies are
light green.
• Disk targets of mirror copies are
yellow.