HP Netserver AA Solution Installation Guide v4.0 SP1

Installing Windows and the Endurance Software 3-31
Adjusting the CE and IOP Event Log Settings
To adjust the Event log settings, on the CE and on each IOP, right click on My Computer
Manage Event Viewer. On the Computer Management screen, click Properties to set the
options for each of the system, application, and security logs. For each log, set the Maximum
Log Size to at least 1024 KB, and enable Overwrite Events as needed.
Continue with Verifying the Endurance Server Installation.
Verifying the Endurance Server Installation
To verify the Endurance server installation:
Step Action Notes
1 On the online IOP, start the Endurance
Manager, and then use it to enable the
CE and IOP in the other tuple.
2 Use Endurance Manager to verify that a
mirror copy is in progress from IOP1 to
IOP2.
The copy proceeds from the IOP on which you
performed the CE installation to the other IOP.
As described on page 3-4, you should have
begun the installation by installing the software
on the smaller of the disks, typically IOP1, and
the mirror copy would be from IOP1 to IOP2.
3 Using the Endurance Manager, issue a
Server Shutdown command.
4 After the CEs and IOPs completely shut
down, power cycle the CEs and the
IOPs.