HP Netserver AA Solution Installation Guide v4.0 SP1

3-34 HP Netserver AA Solution Installation Guide
Installing the Endurance Manager on a Remote Client
This section describes how to install the Endurance Manager on a remote client. For Endurance
Manager information, including information about using Endurance Manager on a remote
client, refer to Chapter 4 in the HP Netserver AA Solution Administrator’s Guide.
You can use Endurance Manager on a remote client to monitor and manage an Endurance
server.
To install the Endurance Manager and the Endurance online documentation on a remote client:
When the installation completes, you can use Remote Endurance Manager to monitor and
manage your Endurance server. Refer to Chapter 4 of the HP Netserver AA Solution
Administrator’s Guide for information.
What to Do Next
For information about Endurance server operational concepts and a system overview, refer to
Chapter 2 of the HP Netserver AA Solution Administrator’s Guide.
For information about how to use the Endurance Manager to monitor and manage your
Endurance server, refer to Chapter 4 of the HP Netserver AA Solution Administrator’s Guide.
Step Action
1 On the remote client, insert the Endurance CD in the CD-ROM drive. Run the Setup
executable.
2 Follow the instructions displayed on the screen, making sure that you select Endurance
Manager as the setup type. Optionally, you can also select the setup type Online
documentation to install the online documentation.