HP Netserver E 60 - Frequentlly Asked Questions

Q17.
What is the PCI slot initialization order?
A17.
During system boot, the PCI slots are initialized in the following order:
PCI slot 2
PCI slot 1
PCI slot 6
PCI slot 3
PCI slot 4
PCI slot 5
Please note that ONLY two bootable plug in SCSI controllers or NetRAID 1Si/NetRAID 3Si
are supported.
Q18.
Which Disk Array Controller (NetRAID) card supported in the NetServer E 60?
Q18.
HP recommends ONLY using the NetRAID 3Si (D5595A) and NetRAID 1Si (D2140A) PCI
board in the NetServer E 60. The NetRAID 3Si may be installed in PCI slots 4, 5, or 6 and
slot 5 is recommended. NetRAID 1Si may be installed in slots 1 or 2. Other NetRAID
(NetRAID D4943A and NetRAID 1 D4992A) controllers will NOT work in E 60.
Q19.
What are the supported video display modes?
Q19.
Resolution Max Refresh Rate @
256 Colors
Max Refresh Rate @
65K Colors
Max Refresh Rate @
16.7M Colors
640x480 200Hz 200Hz 200Hz
800x600 200Hz 200Hz 160Hz
1024x768 150Hz 150Hz 120Hz
1152x864 120Hz 120Hz 85Hz
1280x1024 100Hz 100Hz 85Hz
1600x1200 76Hz 76Hz Not Available
Note: Standard Windows NT 4.0 does not support AGP video card. Service pack 3 or higher must be
applied before changing from the default (640x480) video resolution.
Q20.
What are the supported Network Operating Systems (NOS) on E 60?
A20.
The E 60 supports Novell NetWare 4.2, 5, NWSB 4.2, Microsoft Windows NT 3.51, 4.0, SBS
SCO OpenServer 5.05 and Redhat LINUX 5.2. OS/2 big deals only.
The automated NOS install using the HP NetServer Navigator CD is supported on Novell
NetWare 4.2, 5, Microsoft Windows NT 4.0 and SBS.
Q21.
What is the recommended way of installing Windows NT SBS?
A21.
The recommended way of installing Windows NT SBS is to use the automated install option
of the Installation Assistant on Navigator CD.
Q22.
Will old D5013A Network Interface Card (NIC) drivers work on embedded E 60 NIC?
A22.
No. The embedded NIC on E 60 requires drivers from the Navigator CD E.10.00 or later. A
plug in D5013A NIC can be added for AFT
Q23.
Does pcAnywhere auto install when installing Microsoft Windows NT using Installation
Assistant NT on the HP NetServer Navigator CDl?
A23.
The pcAnywhere 8.01 is NOT auto installed with Installation Assistant. Before manually
installing pcAnywhere, Windows NT Service pack 3 or higher must be applied.