HP NetServer E60 Quick Service Reference Guide Last Updated: May 1999
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
HP NetServer E60 System Information Front and Back Views Floppy Drive Power CD-ROM Drive Optional Tape Backup Drive Keyboard Mouse Power On/ Off/Sleep On/Off/Sleep Indicator Serial Port A SCSI/IDE Activity Serial Port B Key Lock Parallel Port LAN RJ45 External SCSI Port Knock-out Video SVGA Fold Out Feet Removing and Replacing the Cover To remove and replace the cover, you will need a Torx 15 driver or 1/4-inch flat blade screwdriver.
Front of Chassis Bottom of Chassis Installing the cover Memory The NetServer E 60's main memory is implemented with 3.3V, 100 MHz, unbuffered SDRAM DIMMs (Dual In-Line Memory Modules). The NetServer E 60 ships with at least 64 MB of main memory and supports up to 1 GB. Memory is available in the following DIMM capacities: 64, 128, and 256 MB. There are four DIMM sockets on the system board. DIMMs may be installed in any combination in any socket.
Exploded Views 1 6 5 2 4 3 7 9 8 12 7 20 19 18 10 16 15 11 14 6 21 17 13 3
Replaceable Parts List NOTE The part numbers listed here are valid at the time of publication. Part numbers may change after publication. If a part number changes, HP's parts price list database will generally contain a reference to the new or revised part number. If a system board needs to be replaced, remove the processor, memory, video board, and any added accessory boards, and keep them with the system under repair.
Keyboards Language HP Part Number Language HP Part Number US #ABA D4950-63001 Spanish #ABE D4950-63004 Dutch #ABH D4950-63006 French #ABF D4950-63005 Russian #ACB D4950-63030 Norway #ABN D4950-63009 Czech #AKB D4950-63036 Swiss #ABP D4950-63011 Italian #ABZ D4950-63017 Poland #AKD D4950-63038 Turkish #AB8 D4950-63033 Swiss-German #ABP D4950-63011 Taiwan #AB0 D4950-63023 Arab-English #ABV D4950-63020 UK/Irish #ABU D4950-63013 Arab-French #AB6 D4950-63025 Danish #ABY D4950
System Board Illustration Power PS/2 Style Keyboard & Mouse Serial A Parallel Serial B LAN (RJ45) Terminator Processor Memory Slots Snap Flexible Disk IDE1 IDE2 AGP Video PCI Slot 1 SCSI B SCSI A PCI Slot 2 PCI Slot 3 Full-sized PCI Slot 4 Full-sized PCI Slot 5 Full-sized PCI Slot 6 shared with ISA Slot Full-sized 6 System Switches Status Connector Snap System Board screw not visible when processor is installed System Board Screw
System Switch Details 2 1 3 4 5 6 7 On Off 8 400 Mhz Off = KBD power on 450 Mhz Unused 500 Mhz On = Clear Password On = Clear Configuration The switches and each of their definitions are listed below. Switch position 1 Factory preset OFF Definition: Off - let's you power on your system by pressing any key on the keyboard or the poweron button. On – let's you power on the system only by pressing the power-on button. Unused 2 3 OFF Clears the password.
Specifications Temperature Operating Non-operating Humidity (non-condensing) Operating 5°to 35°C (41°to 95°F) -40° to +65° C (-40° to +149° F) 20% to 80% relative humidity, non-condensing Non-operating 5% to 95% relative humidity, non-condensing Operating -30 to 3,000 m (~ 10,000 ft) Non-operating -30 to 12,000 m (~ 40,000 ft) Altitude Thermal Output Maximum Operating Hardware Processors 1116 BTU/hr Intel Pentium II or III (up to 2 processors), supported speeds: 400, 450, and 500MHz.
Power Supply Specifications Type Input - Max. Range Auto-ranging 100 to 127 VAC ~5 A at 50/60 Hz 200 to 240 VAC ~ 2.85 A at 50/60 Hz Operating Current 100 VAC: 5.3 A 120 VAC: 4.6 A 200/208 VAC: 3.2 A 220/230 VAC: 2.
Notes: 10