HP Support Anywhere Installation and User Guide

Chapter 3 Installing the HP Support Anywhere Software
47
You can enter any alphanumeric combination up to 20 characters in the
space provided. The password you enter here will be required for remote
access to the HP NetServer.
5. Tab to OK and press Enter.
The HP Modem Initialization Utility saves the modem initialization string
and password, and informs you that initialization is about to occur.
6. Select Yes to initialize the modem. (Cancel returns you to the HP Utility
Partition's Main Menu.)
The HP NetServer E 40 or E 45 awaits a call from the remote console and
is functionally disabled until a connection is made. To disable password
protection and return to normal NetServer operation, press the space bar.
NOTE Once the NetServer's modem has been initialized, your
customer's HP NetServer E 40 or E 45 awaits a call from the
remote console and is functionally disabled until a connection
is made.
Setup at the Remote Console
You can use pcANYWHERE32 (shipped with each HP NetServer E 40 and E
45). Or, you may use any standard communications program to establish a
simple, character-based terminal connection from a console workstation to the
HP NetServer E 40 or E 45.
The advantage of using pcANYWHERE32 is that it is pre-configured for HP
Remote Console Redirection via the pre-install disk.