HP Netserver E 800 Installation Guide

Setting Up the HP NetServer E 800
8
5. If necessary, install the internal accessory SCSI cable into SCSI channel B
and connect to the SCSI drives or optional backup tape drive.
Use HP NetServer E 800 External/Internal SCSI Cable Kit, part number
P1773A.
SCSI B
Connector
Terminator
SCSI
Connectors (2)
NOTE The slower speed of the tape drive may slow disk access time
for the Ultra-2 SCSI drives. You may connect the tape drive
separately from the Ultra-2 SCSI drives using the optional
internal accessory SCSI cable.