Installing MS BackOffice Small Business Server 4.x

13
B. Press F2 to enter setup
C. Select "Configuration" menu.
D. Select "Embedded NIC"
E. Press + or - to select enable.
F. Press F10, select "yes" and press enter to save changes.
2. Reboot system to SBS.
3. Click OK at the "Service Control Manager" screen that reads "At least one service or
driver failed during system startup....".
4. Enter your company information on the data entry panel and click next to continue.
5. Click OK at the "Dr. Watson for Windows NT" error message that reads "...
sysocmgr.exe application access violation 0xc0000005....".
6. Right click the mouse on Network Neighborhood and then click properties on the
menu.
7. Click Adapters, Click Add
8. Click "Have a Disk". Insert the Hewlett Packard "NT 4.0 Drivers diskette". Type the
following path a:\nicdrv and press enter.
9. Click OK to accept the default selection "HP 10/100 TX PCI Adapter".
10. Click "Close".
11. Click OK at the "Setup Message" panel that reads " Remote Access not configured
...".
12. Remove the driver's diskette and Click Yes to restart the system now.
13. Complete company information data entry form and click Next.
14. Select appropriate components and click Next to continue. (Keep the default options
for test purpose).
15. Click OK at the error message that indicates that the SHLWAPI.DLL could not be
found.
16. Click Yes at the message that reads "The files c:\SmallBusiness\clients can not be
found. Do you want them copied over?
17. Insert CD-ROM number two when prompted.