Installing MS BackOffice Small Business Server 4.x

18. Click on Finish.

19. Clear the NT error logs in the event viewer.

20. Perform a Shutdown and restart computer. Verify that SBS comes ready with no error

messages. Check the error logs in the event viewer. You should not have any error

listed. If errors are found you may have to decode the information to resolve the

issue.

21. Install high resolution video driver if needed.

Installing pcANYWHERE32 on your HP NetServer E 60

After you install Windows NT 4.0 Server or Small Business Server (SBS) using either

Installation Assistant or the manual method, you may want to install Symantec's

pcANYWHERE32 (included with your system) to do remote management of your server.

Microsoft Windows NT SBS 4.0 does not include AGP video driver support in its

operating system. Furthermore, the AGP video drivers will not correctly install on an

SBS 4.0 system without the latest service pack. Though SBS 4.5 does not need a service

pack in order to allow the correct installation of the AGP video driver, it is a good idea to

apply the latest service pack available.

The video drivers will not install correctly if pcANYWHERE32 has already been

installed. You will need to first uninstall pcANYWHERE32 if it has already been

installed on your HP NetServer E 60

To install pcANYWHERE32 on your HP NetServer E 60, do the following in this

specific order:

1. Install the latest service pack for the version of SBS that you are installing.)

2. Install the video drivers for your HP NetServer E 60 using the video Drivers Diskette

you created from the Navigator CD. Open the Control Panel. Run the Display

utility. Click the Settings tab and then the Display Type button. Change the adapter

type and install the ATI AGP video card drivers from your video Drivers Diskette.

3. Install pcANYWHERE32 on your server as described in the HP NetServe E 60

Remote Console feature documentation (available via Information Assistant on the

HP NetServer Online Documentation CD).

Section 3. Installing NT SBS 4.5 on the HP NetServer E

40, E 45, E50, E 60 and E 800

Installation Issues for the E 40, E 45, and E 50

Windows NT SBS 4.5 does not have the appropriate driver for the following subsystems