Installing MS BackOffice Small Business Server 4.x

23
37. Click <I agree> to accept the license agreement.
38. Click <Next>.
39. Enter 10 digit CD Key. (Read your SBS 4.5 CD-ROM label to obtain the 10 digit CD
key.)
40. Click <Next> at the installed modems screen.
41. Click <Yes> at the fax server dialog box to accept that the service will not be
installer.
42. Hardware Confirmation screens shows the following:
For NetServer E 60:
Two entries for aic78xx.
One entry for video 640x480.
One IDE CD-ROM (ATAPI 1.2).
No NIC. (The NIC needs to be added next).
For NetServer E 800
Two entries for Sym_hi(53c8xx).
One entry for Video 800x600.
One IDE CD-ROM (ATAPI 1.2).
No NIC. (The NIC needs to be added next).
43. Click <Change>.
44. The control panel folder is now opened. Double click <Network>.
45. Click <Adapters> tab.
46. If present, remove loopback adapter.
47. Click <Add>.
48. Click <Have a Disk>.
49. Insert the Hewlett Packard "Windows NT 4.0 Drivers diskette". Type the following
path a:\nicdrv and Click <OK>
50. Click <OK> to accept the default selection "HP 10/100 TX PCI Adapter".
51. Click <Close>. Note: The default protocol parameters are:
IP address = 10.0.0.2
Subnet mask = 255.0.0.0.
Primary and Secondary Wins = 10.0.0.2