Getting Started with Stac Replica Backup

Chapter 3 Installing Replica

• At least one supported HP SureStore T4 tape drive and a blank tape

cartridge

For the administration PC:

• Windows 95

• At least 8 MB RAM

• At least 4 MB free disk space

• A 1.44 MB floppy disk drive

• A network connection to the servers protected by Replica

• Administrator privileges for server access

NOTE For successful installation of Replica on the NetWare server,

Windows 95 must be running on the administration PC.

Installing from any other operating system will result in an

incorrect installation.

If your HP NetServer is running Novell NetWare 3.12, Novell IntranetWare, or

Novell IntranetWare for Small Business:

To install Replica on an HP NetServer running Novell NetWare or IntranetWare

for Small Business, do the following.

Before You Begin

Replica has minimum levels, as defined in the Stac Replica README file for

NetWare, but HP encourages all users to be at the latest fix level available from

Novell. A README file about using Replica with NetWare 3.12 is provided on

the Stac Replica Backup Software CD-ROM as follows.

English \stac\eng_nw\readme.wri

French \stac\fre_nw\readme.wri

German \stac\ger_nw\readme.wri

Italian \stac\ita_nw\readme.wri

Spanish \stac\spa_nw\readme.wri

Before installing Replica, print out the README file and review the section,

"NetWare Modules and Specifications." The section defines the minimum

module versions required for proper operation of the Replica software. HP

strongly encourages users to be at the lastest fix level available from Novell in