Getting Started with Stac Replica Backup

Chapter 4 Configuring An Automatic Backup

Figure 4-8. Tape Drive Selection Window

IMPORTANT In the Tape Drive Selection window, the HP SureStore T4 tape

drive is identified as an HP T4000s drive. Only SureStore

drives with the T4000 designation will work with Replica.

4. Choose a tape drive from the menu of available tape drives, then

click Next.

NOTE If the tape in the selected drive contains data from a previous

Replica backup, the Wizard asks you to confirm the

overwriting of the data based upon the new configuration.

The Wizard displays the Volume Selection window listing HP NetServer

volumes that are available for backup.