HP Netserver E 45/E 50 Remote Administrator Guide

Chapter 2 Installing HP Remote Console Redirection
11
Modem Installation
To enable console redirection, you need to connect an external modem to the
NetServer port you assigned for use with console redirection. The ports are
designated on the back of the NetServer. Connect the modem to the port you have
chosen for console redirection, either Serial A or Serial B.
Modem Initialization
At the HP NetServer, the third step required to enable a Remote Console is
initializing the modem.
To initialize the modem and initiate a remote console session:
1. Reboot the server and, when prompted, press [F12].
The server displays the Utility Partition Manager.
Main Menu
Update system BIOS
Run HP disk array utility
Diagnostic Assistant
HP Console Redirection
Run SCSI Configuration Utility
Set Date
Set Time
Select keyboard language
Exit
2. On the Utility Partition Main Menu, cursor to "HP Console Redirection."
The server displays the HP Console Redirection screen.
3. From the popup menu, select "Initialize the modem."
The program supplies a default initialization string (AT&F). This string
includes a group of characters sent to the modem that configure it for
routine operations. Use either the default string supplied by HP, or the