HP Netserver E 45/E 50 Remote Administrator Guide

Chapter 2 Installing HP Remote Console Redirection

initialization string supplied by the manufacturer of the modem you

connected to the NetServer.

Modem Initialization Utility

Modem initialization string:

AT&F

OK <Cancel> <Help> <Select Modem>

NOTE You can modify the modem initialization string as required.

This string may have been preset by the service personnel who

call in to diagnose problems with the server remotely.

4. The HP Modem Initialization Utility also allows for a case-sensitive

password.

You can enter any alphanumeric combination up to 20 characters in the

space provided. The password you enter here will be required for remote

access to the HP NetServer.

5. Tab to OK and press Enter.

The HP Modem Initialization Utility saves the modem initialization string

and password, and informs you that initialization is about to occur.

Modem Initialization Utility

hen you select Yes, the utility initialized the modem and then puts

the server in standby mode until contacted by the remote console.

>Yes< <Cancel>

6. Select Yes to initialize the modem. (Cancel returns you to the HP Utility

Partition's Main Menu.)

Modem Initialization Utility

aiting for remote login. . .

Press the space bar to abort remote

console access.

The HP NetServer awaits a call from the remote console and is

functionally disabled until a connection is made.