HP Netserver E 60 Installation Guide

Chapter 2 Controls, Indicators, and Ports
11
Rear View
The ports and connectors in the rear are listed below, and shown in Figure 2-2.
• The system includes a LAN port based on the Intel 82559 10/100 BaseT
Fast Ethernet PCI embedded controller. It has an RJ-45 LAN connector
and two LEDs to indicate LAN speed and valid connection.
• The Serial Port A is a standard serial port.
• The Serial Port B is a standard serial port.
• The Parallel Port is a standard parallel port which supports Extended
Capabilities Port (ECP) / Enhanced Parallel Port (EPP).
• The Mouse Port accepts a standard mouse with a PS/2 connector.
• The Keyboard Port accepts a standard keyboard with a PS/2 connector.
• The Monitor Port interface specifications are listed in the "Video Display
Modes" section of Appendix A.
• The Power Connector accepts a standard power cable to connect the HP
NetServer E 60 with the site power supply.
• To install an external SCSI port you need the optional HP NetServer E 60
External SCSI Port Cable Kit (P/N D8214A).