HP Netserver E 60, LC 3, LH 3/3r, and LPr Processor Upgrade Guide

Chapter 3 Installation in LC 3 and LH 3/3r
21
2. Lift up on the processor ejector lever until the processor pops out of the
processor slot (see Figure 3-7).
Processor Ejector Lever
Processor Mounting Bracket
Figure 3-7. Removing a Processor Module With a Retaining Latch
CAUTION Do not move the processor ejector lever beyond its limit
(about 25-30 degree angle from the original position). The
ejector lever may break if forced.
3. Remove the processor module from the mounting bracket assembly.