HP Netserver E 60, LC 3, LH 3/3r, and LPr Processor Upgrade Guide

Chapter 3 Installation in LC 3 and LH 3/3r
31
Primary Processor
Module
Secondary Processor Position
Terminator Board
Retaining Latches
Terminator Board
Figure 3-15. Install the Terminator Board in a Single-Processor
HP NetServer LC 3 or LH 3/3r
2. Insert the terminator board into the upper (secondary) processor position.
3. Verify that the terminator board is installed completely in the slot. When
the terminator board is installed completely, the retaining latches (see
Figure 3-15) will be closed.