HP Netserver E 60, LC 3, LH 3/3r, and LPr Processor Upgrade Guide
49
5 Verification
Verification Overview
HP DiagTools is the offline diagnostic program that you will use to verify the
processor upgrade. You will run it from a flexible diskette that you will make
from the HP NetServer Navigator CD-ROM.
To verify the upgrade, do the following:
• Start HP NetServer Navigator, and go to the NetServer Utilities menu.
• Use HP NetServer Navigator to create an HP DiagTools flexible diskette.
• Run HP DiagTools from the flexible diskette to verify the upgrade.
• Reinstall the NOS, if necessary.
• Verify the NetServer date and time.
NOTE Download the HP NetServer DiagTools Error Reference and
User Guide from the following web site:
http://www.hp.com/go/netserver/servsup/
trouble/
Start HP NetServer Navigator
Start HP NetServer Navigator, and go to the NetServer Utilities menu, as follows:
1. Turn on power to the display monitor and the NetServer.
The HP NetServer Navigator CD-ROM should still be in the drive. If not,
insert the HP NetServer Navigator CD-ROM into the drive, turn the
power off, wait 10 seconds, and turn the power on again.