HP Netserver E 60 Remote Administrator Guide

Chapter 2 Installing HP Remote Console
11
Figure 2-6. pcANYWHERE Setup, Modem Selection
8. After setup with the Smart Wizard is complete, pcANYWHERE32 displays the main program
window.
pcANYWHERE
menu bar
pcANYWHERE
action button bar
Figure 2-7. pcANYWHERE Main Screen
Once you have completed the initial pcANYWHERE32 installation, you will need to configure for your
remote console modem model and phone number for your HP NetServer. After selecting a modem model
(from the ones on the supported modem list), you need to identify the phone number of each server you want
to remotely access.
To set the host phone number:
1. At the main program window action bar, click Call Online Service.
You will see an Add Online Service item and a connection item labeled E60Clien created for you by
the Smart Setup Wizard.
2. Right-click E60Clien to display the item’s drop-down menu and click Properties.
3. In the Properties window, click Details and verify that the correct COM port and modem type are set.
Microsoft Windows 95 and NT 4.0 will present you with a pre-configured list of Unimodem entries
for your selection. NT 3.51 will present you with COM port options.
4. Click the Settings tab and enter the server’s phone number.
5. Click OK to return to the main program window.