HP Netserver E 60/E 800 Remote Administrator Guide

Chapter 3 Installing Graphic Console Redirection
18
pcANYWHERE
menu bar
pcANYWHERE
action button bar
Figure 3-3. pcANYWHERE Main Screen
To finish configuration, at the main program window:
1. Click "Be A Host PC."
2. Select the Modem connection item (see the following figure).
Figure 3-4. pcANYWHERE Be A Host PC Screen
3. Right-click the Modem connection item to display the drop-down menu.
4. Choose "Properties…" from the drop-down menu in the Connection Info section.
After verifying that the COM port and modem type are set correctly, click OK to return to
pcANYWHERE32's main program window.
5. Run the Modem connection item by double-clicking it. This initializes the modem and establishes the
Modem connection item you just set up as the default.
NOTE The settings you have just selected become pcANYWHERE32's defaults for the server-
side installation. In order for pcANYWHERE32 to communicate with a remote console,
the installation at the remote console must use these same settings.