Installing IBM OS/2 on an HP Netserver

LS 2 \7800 AIC7870.ADD

LH Pro 2 \7800 AIC7870.ADD

LH 2 \7800 AIC7870.ADD

LD Pro 1 \7800 AIC7870.ADD

LC 1 \7700 AIC7770.ADD

LC 2000 2 \SYM897 SYM_HI.ADD

LF 2 \7700 AIC7770.ADD

LM 2 \7700 AIC7770.ADD

LE1NA

E 40 1 \7800 AIC7870.ADD

E 45 1 \7800 AIC7870.ADD

E 50 1 \7800 AIC7870.ADD

E 60 2 \7800 AIC7870.ADD

LPr 1 \sym895 SYM8XX.ADD

LH 3 1 \sym895 SYM8XX.ADD

LH 4 1 \sym895 SYM8XX.ADD

LH 3000 2 \SYM896 SYM_HI.ADD

" 1 \7800 AIC7870.ADD

Table 1b

Driver Path on Navigator SCSI

NetServer CD-ROM Driver Name

LX \periph\adp7800\os2\7800 AIC7870.ADD

LS \periph\adp7800\os2\7800 AIC7870.ADD

LH Pro \periph\adp7800\os2\7800 AIC7870.ADD

LH \periph\adp7800\os2\7800 AIC7870.ADD

LD Pro \periph\adp7800\os2\7800 AIC7870.ADD

LC \periph\adp7700\os2\7700 AIC7770.ADD

LC II \periph\adp7800\os2\7800\ver2.1 AIC7870.ADD

LF \periph\adp7700\os2\7700 AIC7770.ADD

LM \periph\adp7700\os2\7700 AIC7770.ADD

LE NA AHA152X.ADD

E 40 \periph\adp7800\os2\7800 AIC7800.ADD

E 45 \periph\adp7800\os2\7800\ver2.1 AIC7800.ADD

E 50 \periph\adp7800\os2\7800\ver2.1 AIC7800.ADD

E 60 \periph\adp7800\os2\AIC7870.ADD

LPr \periph\adp7800\os2\sym8xx\ver406 SYM8XX.ADD

LH 3 \periph\adp7800\os2\sym8xx\ver406 SYM8XX.ADD

LH 4 \periph\adp7800\os2\sym8xx\ver406 SYM8XX.ADD

Section 1. Installation Tips and Considerations

Tip 1) Extended Translation Setting

Enable "Extended Translation for Drives > 1 GB" in the SCSI-Select utility. To access SCSI-

Select, press Ctrl-A as soon as the Adaptec banner appears while the system is booting. You can

also set this option by using the ECU utility in the advanced mode.

Tip 2) Extending Disk Capacity Beyond 1 GB

For the D2078A/B EISA Fast SCSI-2 Host Adapter, you must enable the extended SCSI

translation feature (support for drives >1 GB) for hard drives with capacities greater than 1 GB,

including the HP D2077A 2 GB Fast SCSI-2 hard drive. Extended SCSI translation uses the