2002

ManualsBrandsHP ManualsServerHP NetServer LC 3

lh30002k71-74

3/8/02 2

Server Configuration

Parameter Specification

RAM 256 MB, minimum. Must be HP.

Number of power

supplies

Two standard, three required for redundancy, four for redundant power cords

I/O slots Added cards may be installed in any appropriate slot, considering the server

default boot order provided below.

Default boot order

IDE CD-ROM, FDD, single-ended SCSI C, embedded SCSI A, embedded SCSI

B, PCI slot 8, PCI slot 7, PCI slot 6, PCI slot 5, PCI slot 4, PCI slot 3, PCI slot 2,

PCI slot 1

Local Storage

Controller Embedded SCSI, embedded DAC, or NetRAID-1M

Driver For embedded SCSI on Ultra2 models, sym_hi.sys, version 4.12, or later

For embedded DAC, mraid35x.sys, version 2.66, or later

For NetRAID-1M, use mraid2k.sys, version 5.20, or later.

(drivers obtained from Navigator CD-ROM, version L.20.00, or later)

Physical drive location Server internal drive bays, or HP external drive cabinet

(e.g., HP Rack Storage/12)

Disk drives Must be HP

SCSI bus Any HP cables that meet SCSI specifications, and any SCSI bus speed

SCSI IDs Any

System software

Navigator CD-ROM Version M.04.00, or later

Operating system

Service pack

Microsoft Windows



2000 Advanced Server

Latest service pack

HP Surestore Auto Path

Version 1.03.00 or later.

Required only if two Fibre Channel Host Bus Adapters are configured for shared

storage. No Load Balancing is set for the FC HBA devices on each node. See the

dual HBA diagrams on pages 5 and 6 for more information.

Shared Storage Configuration

Parameter Specification

Controller

Model HP D8602B Fibre Channel Host Bus Adapter

Number of controllers One or two

Dual HBA controller configurations require running HP Surestore Auto Path VA.

Note that the purpose of the second HBA is to provide an alternate path for

automatic failover only.

Driver Afcw2k.sys, version 3.0.4107.0 (driver obtained from Navigator CD-ROM,

version M.04.00, or later)

Registry settings N_Port enabled for Fabric configurations

NL_Port enabled for Arbitrated Loop configurations

Refer to the readme file included with the HBA driver for instructions on

modifying driver parameters.