2001

LP1KR2K2M21

11/15/01 7

NOTES:

1. Color coding depicts the two

different cable part types :

To connect server to DS2100 --

3. Only connect channel 0 of

the NetRAID-2M to the DS2100.

Using channel 1 is not supported.

4. There are no ‘left’ or ‘right’ port

requirements for cabling to the DS2100.

Cables can be attached to either port.

5. Connect LAN ports A for the

heartbeat cluster interconnect. Use ports

B for the client LAN connection.

This diagram depicts using

two DS2100’s. You can use from

one to two storage cabinets per

cluster.

C7541A - 2 Meter ILT cable

To connect DS2100’s together -

connect to

NetRAID-2M

channel 0 only!

LAN A

LAN B

- Client LAN

LAN B

- Client LAN

Heartbeat

Connection

-crossover cable

or equivalent

Heartbeat

Connection

-crossover cable

or equivalent

SCSI Switch

A B C

SCSI Switch

6. Set the DS2100 SCSI ID switches as shown.

- The following addresses will be assigned to

installed disks in the top DS2100: 8, 10, 12, and 14.

- The following addresses will be assigned to

installed disks in the bottom DS2100: 9, 11, 13, and 15.

C 2978B - 0.5 Meter LVD cable

HP Netserver LP 1000r Cluster using two HP Surestore DS2100 Disk Systems