2002

lc2000nt3Si

01/26/02

Server Configuration

Parameter Specification

Number of power

supplies

One standard, two required for redundancy

I/O slots Added cards may be installed in any appropriate slot, considering the server

default boot order provided below:

Default boot order IDE CD-ROM, FDD, embedded SCSI A, embedded SCSI B, PCI slot 1, PCI

slot 2, PCI slot 3, PCI slot 4, PCI slot 5, PCI slot 6

Local Storage

Controller Embedded SCSI, NetRAID-1Si, or NetRAID-3Si.

Driver For embedded SCSI, sym_hi.sys, version 4.12, or later

For NetRAID-1Si or NetRAID-3Si, mraidnt.sys, version 2.24

(all drivers obtained from Navigator CD-ROM, version L.18.04.5, or later)

Physical drive location Server internal drive bays, or HP external drive cabinet

(e.g., HP Rack Storage/12)

Disk drives Must be HP (hot swapped or fixed)

SCSI bus Any HP cables that meet SCSI specifications, and any SCSI bus speed

SCSI Ids Any

System Software

Navigator CD-ROM Version L.18.00, or later

Operating system

Microsoft Windows NT



Server 4.0, Enterprise Edition

Service pack SP6a

Power Distribution

Layout Redundant power distribution units (PDUs) are recommended. See power-

cabling diagram on page 6.

Shared Storage Configuration

Parameter Specification

Controller

Model HP NetRAID-3Si Controller, Model D5955A

Number of controllers One

BIOS B.02.02

Firmware Version W.01.30 (firmware obtained from Navigator CD-ROM, version

L.18.04.5, or later)

Driver Mraidnt.sys, version 2.24

NetRAID Assistant Version A.01.15, or later

(software obtained from Navigator CD-ROM, version L.18.04.5, or later

SCSI IDs 6, 7

Channels 0, 1, 2

RAID levels 1, 5, 10, 50

Logical disks One per RAID array

Eight, maximum, per cluster