HP Netserver LC 2000 RS/12FC /Windows 2000 Advanced Server Cluster Configuration Guide

Power source Direct from power mains, power conditioner or uninterruptible power
supply (UPS) using any power conditioner or UPS.
System software:
Navigator version L.18.02 or later
Operating System Microsoft Windows 2000 Advanced Server
SPU
Model HP NetServer LC 2000
Clock speed 733 MHz
No. of CPUs 2
BIOS version 4.06.20 PV or later
CPU cache Any size
RAM 256 MB minimum. Must be HP.
No. of power supplies 1 standard, 2 required
Local storage See
Local Storage below.
I/O slots: P1 - Local storage
P3 - Client LAN
P5 - Shared Storage
Storage
Local
Controller Use embedded SCSI as the boot controller. For additional local storage:
May use embedded SCSI or NetRAID-1Si in PCI slot P1.
May not use embedded RAID, NetRAID-1, NetRAID-3, or NetRAID-3Si.
Driver Use driver(s) supplied with Microsoft Windows 2000 Advanced Server.
Cabinets (Physical drive
location)
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Disk drives Must be HP (hot swap or fixed)
SCSI bus Any HP cables that meet SCSI specifications and any SCSI bus speed.
SCSI Ids Any
Shared
HP Rack
Storage/12FC
Required
Host Bus Adapter
Model HP Fibre Channel Host Bus Adapter - HP D8602A
No. of controllers 1
Driver Hhba.sys 2.06
SPU I/O slot P5
RAID level 0,1, 3, 5
Cabinet
RAID arrays Not more than eight physical drives per logical array and not more than
eight LUNs are permitted per multiple Rack Storage 12/FC clusters.
Number of cabinets 1