Windows 2000 Advanced Server Cluster Configuration Guide

FC Array Cards HP Fibre Channel Array Controller - D5990A

No. of cards per cabinet 2 (Requires second card be installed in the Rack Storage/12FC)

Firmware 4.64-00 or later

Status SCSI ID 5 (fixed)

Disk SCSI IDs 0 – 3, 8 – 15 (fixed)

Disk drives: HP 9.1 GB (7200 rpm)Ultra SCSI Disk Module D6106A

HP 9.1 GB (10k rpm) Ultra SCSI Disk Module D6107A

HP 18.2 GB (7200 rpm) Ultra SCSI Disk Module D6108A

HP 18.2 GB (10k rpm) Ultra SCSI Disk Module D7031A

HP 18.2 GB (7200 rpm) Low Profile Ultra SCSI Disk Module D7174A

HP 18.2 GB (10k rpm) Low Profile Ultra SCSI Disk Module D7175A

HP 36.4 GB (10k rpm) Ultra SCSI Disk Module D8210A

Fibre Channel Cables Optical – Server to Hub Only: 50 meter D6980A

100 meter D6981A

Copper – Server to Hub and/or Shared Storage to Hub:

3 meter D6978A

5 meter D6979A

10 meter D7080A

Hub

Model HP D6976A 6-port fibre channel hub

Quantity 1

LANs

Intra-cluster (Heartbeat) LAN Client LAN

LAN connection HP D5954A crossover cable or any

equivalent.

Any LAN

The intra-cluster LAN may only be

used for cluster node

communication via a crossover

cable. It may not be used for client

communication.

NIC:

Model Embedded NIC Any that is on both the HP

Tested Products List and the

Microsoft Hardware

Compatibility List.

Driver Supplied with Microsoft Advanced

Server CD

Any driver

NOTE If the NIC used is the

same type as the embedded NIC

(D5013A/B), then the Client

LAN NIC must use the same

driver as the Intra-cluster NIC.

No. of NICs 1 1 minimum

SPU I\O slot N/A P3