HP Netserver LH Pro NetRAID Installation Guide

Part 1: Installing Additional Hardware Components
HP NetServer LH Pro Microsoft Cluster Installation Guide - 1 October 1997 8
The connector is keyed to insure correct connection. When connected, the battery backup module protects
the HP NetRAID Adapter’s cache memory.
HP NetRAID Adapter with Connected Battery Pack
NOTE To assemble a certified Microsoft Cluster Server, use only an HP NetRAID Adapter (model number
D4943A).
2. Using a Torx
TM
driver, remove the PCI card holdown plate.
3. With the battery backup module connected, install the HP NetRAID Adapter in PCI slot 9.
4. Replace the hold-down plate.
5. Replace the HP NetServer LH Pro cover and bezel.
You have now completed hardware installation on the HP NetServer LH Pros, and are ready to proceed to
"Part 2: Setting Up the HP Storage System/6."