HP Netserver LH Pro NetRAID Installation Guide

HP NetServer LH Pro Microsoft Cluster Installation Guide - 1 October 1997 33
APPENDIX A Obtaining HP NetRAID Utilities
To get updated versions of the HP NetRAID utilities that contain firmware, driver and the HP NetRAID Assistant
program, you must download, extract, and then copy of nr_clust.exe, a special version of the HP NetRAID utilities
for cluster installations.
To obtain NetRAID firmware, you need to download nr_clust.exe from the HP’s FTP site.
[Enter FTP site address here]
Once you have downloaded nr_clust.exe, you need to extract and copy the HP NetRAID files and utilities to floppy
diskettes.
To extract and copy the HP NetRAID utilities:
1. From Windows NT Explorer, run nr_clust.exe by double-clicking the file.
nr_clust.exe is self-extracting and when executed creates the three subdirectories shown in the following
table.
File Sub-Directory Contents Description Disk Label
Fw_dvr NetRAID firmware update and NetRAID Driver
for Windows NT
NetRAID Firmware & Driver
Nrast_1 HP NetRAID Assistant program Setup. HP NetRAID Assistant 1
Nrast_2 HP NetRAID Assistant program files. HP NetRAID Assistant 2
2. Label three blank formatted diskettes as indicated in the above table.
3. Copy the contents of each of the subdirectories to an appropriately labeled floppy disk.
You will also need a DOS bootable diskette, since the NetRAID firmware update utility runs under DOS.