HP Netserver LXr 8000 for Compaq 4000/7000 Racks

Chapter 2 Warranty and Support
6
Terms used in this document are defined in the table below.
Term
Definition
Rack nut Single nut designed to clip behind the rack column and
accept a screw through the hole in the column.
Slide Extendible side bracket that is attached to the rack
enclosure columns, onto which the NetServer is mounted.
Consists of a stationary component, and an extendible
member (see Figure 3-3). Allows access to the NetServer
after it is installed in the rack chassis.
Slide mounting flange Mounting flange located at either end of the slide (see
Figure 3-3).
Rack (rack enclosure) The equipment enclosure into which the NetServer will be
installed.
EIA unit Industry standard measurement (1.75 inches / 44.45 mm),
consisting of four vertical mounting holes in a rack column.