HP NetServer Installation Guide for the HP NetRAID-4M and Microsoft Cluster Services with Microsoft Windows NT Server 4.0 Enterprise Edition

HP NetRAID-4M Cluster Services Installation Guide Hardware, Drivers and Utilities

29. After clicking Next at the Welcome screen, fill out the name and company screen and

click Next. Choose a path for the new folder and click Next, and Next again to accept the

path.

30. Select the option to perform a Full Install. Accept all defaults of the installation program.

31. When prompted to restart the computer, remove the floppy diskette from the floppy drive,

or the CD from the CD-ROM drive, and select Yes and then click Finish.

32. Log onto Server B.

33. Repeat the previous steps 1 through 26 on Server B to install the HP NetRAID-4M Disk

Array Controller driver and FAST utility and configure the IP addressing for the heartbeat

LAN Adapter (D5013B).

34. Restart Server B.