HP NetServer Installation Guide for the HP NetRAID-4M and Microsoft Cluster Services with Microsoft Windows NT Server 4.0 Enterprise Edition

HP NetRAID-4M Cluster Services Installation Guide Cluster Software Components and Quorum
27
Server B: Install HP NetRAID-4M Cluster Add-on software
13. Remove the Microsoft CD-ROM from the CD-ROM drive.
14. Insert the first NetRAID Software-NT/Win2000 Cluster Installation diskette in the floppy
drive of Server B (or insert the Navigator CD-ROM).
15. Navigate to the A:\ directory and double-click on: setup.exe
Or
If the NetServer Navigator CD-ROM is used, go to path:
\\NSNavigator\periph\nraidadp\nt\cluster\setup.exe
16. Accept the defaults in the installation screens. For the type of installation, select the
Cluster Node option.
17. When the HP NetRAID-4M Cluster software installation is complete, remove the
installation media from the drive.
CAUTION Whenever you remove and reinstall the MSCS software, you must also
remove and reinstall the HP NetRAID-4M Cluster software. Because the
custom DLLs provided by the HP NetRAID-4M Cluster software are not part
of the standard MSCS software, these components must be registered each
time the MSCS software is reinstalled.
3.4 Reapply Latest Microsoft NT 4.0 Service Pack
NOTE Microsoft recommends reapplying the latest service pack whenever files have been
installed from the original Windows NT Server CD after the original installation.
Refer to the Microsoft Knowledge Base article Q196269 for more information.
1. Insert the source media for the latest Microsoft NT 4.0 Server service pack and install the
i386 version on Server A or B.
2. If prompted that the source files are older than the target, click No so that only newer
versions of existing files are copied to the server.