HP Netserver LP 2000r (1.13, 1.26 & 1.40 GHz) Installation Sheet

Installing the PCI Accessory Board
64-bit PCI Slot (1)
I
2
C
Connector
System Board
Installing Power Supplies
Installing Memory
30 Degrees
Keys
Notches
DIMM Slot
Retaining Latches (2)
DIMM Slots
0
1
2
3
System Board
Installing Memory (Continued)
CAUTION Use only HP PC133 MHZ buffered SDRAM DIMMs.
WARNING DIMMs can be damaged by improper handling.
  Always use an anti-static wrist strap and
  grounding mat, and discharge static electricity
  before touching DIMMs.
WARNING Always insert the power supply filler panel into an
  empty power supply bay. Operating with an empty
  bay could cause thermal damage to the Nerserver.
2
1