hp netserver lxr 8500 netraid-2m config guide for Microsoft NT 4.0 Clusters PDF, 85K, 2/23/2002

lxr8500nt2m
2/23/02 5
NetRAID-2M Controllers
0
1
3. Another NetRAID Adapter may be
installed in each server for local
storage (and must connect only to
local storage).
4. This diagram shows use of two
NetRAID-2M controllers, the maximum
supported for shared storage, installed
in slots 7 and 8. One or two NetRAID-2M
cards may be used, and from one to four
RS/12s are supported. A maximum of eight
logical drives are supported for the cluster.
NOTES:
2. Cables between the servers and
shared storage cabinets can be any
HP LVD SCSI cable up to 10 meters.
See “Cables” in the Shared Storage
Configuration table in the guide for
a list of cables that can be used.
HP Netserver LXr 8500 Cluster using HP Rack Storage/12 Cabling Diagram