HP Netserver LXr Pro Surestore E Installation Guide

6
2 NetServer Hardware Setup
Installing the HP A5252B SCSI Host Bus Adapter
The A5252B SCSI host adapter is the only host bus adapter (HBA) supported for use with the HP SureStore E
12H Disk Array in a Windows NT cluster. The A5252B is an AHA-2944UW HBA customized with the
necessary SCSI settings for the disk array, thus ensuring proper operation in a Windows NT cluster.
Disk arrays can be connected in a daisy chain fashion to each A5252B HBA. Refer to the Cluster Configuration
Guide for the recommended number of disk arrays that can be connected to each HBA.
Install the A5252B HBA in an available PCI slot following the instructions included with the HBA. Refer to the
Cluster Configuration Guide for information on which SPU I/O slot to use.
NOTE The A5252B uses the standard Windows NT SCSI driver included with NT 4.0 Service
Pack 3, so it is not necessary to install an additional driver. Refer to the Cluster
Configuration Guide for more information.
To part 2 of the HP NetServer Microsoft Cluster Installation Guide