HP Netserver LXr 8500 and XP Disk Array DC Config Guide for Windows 2000 Advanced Server Clusters

2
SPU
Model HP Netserver LXr 8500
Clock speed 700 MHz
No. of CPUs 2 to 8
BIOS version ASPN Release 8
CPU cache Any size
RAM from 2 GB to 64 GB
No. of power supplies 3
Local storage See Local Storage below.
Remote Management HP Toptools Remote Control Card, HP Toptools for Servers 5.0, Toptools
Agents C.05.01and HP Openview Manage-X/SE 4.20
Storage
Local
Physical drive location SPU internal drive bays or external SCSI RS/12 cabinets
Disk drives any HP disk drive supported by the storage enclosure
Controller HP D2140A - NetRAID-1Si, BIOS: B.02.02, Firmware: F.02.04
Driver mraid35x.sys, version 2.62
Shared
Host Bus Adapters
Model D8602B Fibre Channel HBA
Bus Protocol FC Public NL
No. of HBAs/Server 1
Driver afcw2k.sys, version 3.0.3245.1
Storage Cabinets
HP XP256/512/48 HP A5800A, or HP A5950A, or HP A5920A
Firmware 01.11.22.00/00
Connections
Point to Point Direct Fibre Channel connections
FC Cables HP Short Wave 50/125um Fibre Channel Optical Cable
Options 2 meter – A3583A
16 meter – A3531A
50 meter – A3735A
100 meter – A3736A
Backup and Recovery Software
HP OpenView
OmniBack II Version A.03.50