Compaq 4000/7000 Racks Installation Guide

Chapter 2 Preparing the HP NetServer
17
7. Remove the three screws from the front of the fan cage, as shown in
Figure 2-8.
Figure 2-8. Removing the Fan Cage
(HP NetServer LXr 8500 Shown)
8. Remove the two screws from the sides of the chassis, as shown in
Figure 2-8.
9. Remove the fan cage by lifting it up and pulling its top slightly forward.
CAUTION The light pipes on the underside of the fan cage are fragile.
Be careful not to damage them.