Compaq 4000/7000 Racks Installation Guide

Chapter 2 Preparing the HP NetServer
25
Reinstall the Fan Cage, Fans, Fan Cover, and Top
Cover
CAUTION The light pipes on the underside of the fan cage are fragile. Be
careful not to damage them.
To reinstall the fan cage, fans, fan cover, and top cover do the following:
1. Orient the fan cage as shown in Figure 2-16, being careful not to damage
the light pipes on the underside of the cage.
Figure 2-16. Reinstall the Fan Cage
(HP NetServer LXr 8500 Shown)
2. Lower the fan cage into the chassis. Ensure that the tabs on the front of the
processor tray enter the slots on the fan cage. Tipping the top of the fan
cage slightly forward (away from the HP NetServer) aids this insertion.