Compaq 4000/7000 Racks Installation Guide

Chapter 3 Preparing the Rack

Install the Cage Nuts

Once you have marked the twelve holes, install a supplied cage nut in each

marked hole on all columns, as shown in Figure 3-2.

Cage Nut

Column

Figure 3-2. Installing Cage Nuts

Adjust the Slides

Prepare both slides for mounting, as shown in Figure 3-3:

Rear Flange

Front Flange

Extendible Members

Screws

Figure 3-3. Adjusting the Rear Flange on the Slide