Compaq 4000/7000 Racks Installation Guide

Chapter 4 Installing into the Rack
35
Mount the HP NetServer on the Slides
1. Verify that both slides are fully extended from the rack, as shown in
Figure 4-2.
Lifting Handles
(2 more on other side)
Extended
Slide Members
Figure 4-2. Lifting the Server Onto the Slide Members
2. Using at least two people, lift the HP NetServer by using the lifting handles
on each side. Move the HP NetServer in between the extended slide
members and position it so that the handles are resting on the slide
members, as shown in Figure 4-2 and Figure 4-3.