HP Netserver LC II Installation Roadmap

ManualsBrandsHP ManualsServerHP NetServer LH 3000

Notice

The information contained in this document is subject to change

without notice.

Hewlett-Packard makes no warranty of any kind with

regard to this material, including, but not limited to, the

implied warranties of merchantability and fitness for a

particular purpose. Hewlett-Packard shall not be liable for

errors contained herein or for incidental or consequential

damages in connection with the furnishing, performance, or use

of this material.

Hewlett-Packard assumes no responsibility for the use or

reliability of its software on equipment that is not furnished by

Hewlett-Packard.

This document contains proprietary information that is protected

by copyright. All rights are reserved. No part of this document

may be photocopied, reproduced, or translated to another

language without the prior written consent of Hewlett-Packard

Company.

Hewlett-Packard Company

Network Server Division

P.O. Box 58059, Technical Marketing

Santa Clara, CA 95052-8059 USA

5967-1515

Printed on recycled paper.

LC II

Installation

Road Map

HP NetServer

Installation OverviewInstallation Overview

Configure ISA non-Plug-and-Play board (if installed).

Select Network Operating System (NOS).

Configure Integrated Remote Assistant when prompted during Express configuration,

or by selecting "Configure Remote Management" on the Custom Configuration menu.

Verify contents.

Obtain HP Navigator CD-ROM release history.

View the Readme File.

Test the system hardware using Diagnostic Assistant (optional).

Install all hardware accessories.

Verify installed hardware accessories (optional).

Install Information Assistant.

Visit Order Assistant (optional).

First: Install Hardware Using this Road Map

Second: Configure Hardware

Install HP TopTools.

Refer to the .HP NetServer Management Reference Guide

Fourth: Install and Configure HP NetServer Management

Refer to the , the

, and the rack installation kit

instructions.

HP NetServer Rack Installation Road Map HP NetServer

Rack Assembly and Cabling Reference Guide

Fifth: Install in Rack (Optional)

Third: Install NOS

Install NOS.

For certain versions of Novell NetWare and MS Windows NT, you may use the

HP automated installation process. Install the NOS using the HP-guided

installation process.

For NOSs using vendor-installation process, view and print HP NOS Installation

Instructions. Install the NOS using the vendor-supplied installation utility and

instructions.

Summary of content (6 pages)

PAGE 1
HP NetServer Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.
PAGE 2
LC II Installation Road Map Table of Contents Audience Assumptions This road map is intended for the person who installs, administers, and troubleshoots LAN servers. Hewlett-Packard Company assumes that you are qualified in the servicing of computer equipment and trained in recognizing hazards in products with hazardous energy levels. 1.Overview of HP NetServer LC II Features 2. Verify Contents 3. Obtain HP Navigator CD-ROM Release History 4. Connect Monitor, Keyboard, and Mouse 5.
PAGE 3
r to To ensure that you have the latest versions of the software, obtain the current release history. It describes the latest software updates to each release of the HP Navigator CD-ROM, and it contains instructions for obtaining the current release. Obtain the release history from one of these sources: ! Fax—Call HP’s fax system at 1-800-333-1917 (or 1-208-344-4809 from your fax machine), and request document rver Navi ga tSe number 6005 Ne ! Internet WWW—http://www.hp.com:80/netserver/support/news_main.
PAGE 4
7 Install Additional Memory Crosspiece must be OFF work surface. System Board DIMM Installation Rules ! Use only HP DIMMs listed on the Technical Reference Label located inside the HP NetServer top cover, in Information Assistant, or on Order Assistant. ! DIMMs can be 32 MB, 64 MB, or 128 MB in any combination. ! DIMMs can be installed in any order in any of the four DIMM sockets. Notches DIMM 1.
PAGE 5
9 Install Additional Mass Storage Devices Preinstalled Devices ! ! ! ! A flexible disk drive is preinstalled in Shelf 1. An IDE CD-ROM drive is preinstalled in Shelf 2. Some models have a SCSI hard disk drive preinstalled in Shelf 3. Some models have a hot swap subsystem that can support up to three hot swap drive modules. NOTE For certain mass storage configurations you may need additional cables or adapters. See Order Assistant and Information Assistant for configuration information and part numbers.
PAGE 6
10 Replace All Covers and Connect All Cables System Board 1. Lower the system board: If the system board is in the raised 3 Thumbscrews e Sid er v o C position, hold the handles of the retaining latches vertical, and push the system board down to seat it firmly in its slot. Then, lower the retaining latches simultaneously to secure the board. 2. Replace all covers: 1 1 Top er Cov 2 a. If a side cover was removed, insert its lower channel onto the lip at the bottom of the chassis.