HP Netserver LH 3000 FC Config Guide for Windows NT4.0 Clusters

2
Navigator version L.18.02 or later
Operating System Microsoft Windows NT Server 4.0, Enterprise Edition with Service Pack
SP6A or later
SPU
Model HP NetServer LH3000
Clock speed 733, 800, 933 MHz
No. of CPUs 2
BIOS version 4.06.24 PT or later
CPU cache Any size
RAM 128 MB minimum. Must be HP.
No. of power supplies 2 required, 3 for redundancy, 4 for power cord redundancy
Local storage See Local Storage below.
I/O slots Added cards may be installed in any appropriate slot, keeping in mind
the server’s default boot order as listed below:
Default Boot Order IDE CD-ROM, FDD, SE SCSI C, Embedded A, Embedded B, PCI-8,
PCI-7, PCI64-6, PCI64-5, PCI64-4, PCI64-3, PCI64-2, PCI64-1
M/S Certified
Configuration
P5 – Local Storage (NetRAID-1Si)
P6 - Client LAN
P8 - Shared Storage HBA
Booted from embedded DAC
Storage
Local
Controller May use embedded SCSI, embedded DAC, NetRAID-3Si or
NetRAID-1Si.
Driver For embedded SCSI, use sym_hi.sys version 4.12 or later. For
embedded DAC and NetRAID-xSi, use mraidnt.sys version 2.24
Cabinets (Physical drive
location)
SPU internal drive bays or HP external drive cabinet (e.g., HP Rack
Storage/12), any number.
Disk drives (hot swap or
fixed)
Must be HP.
SCSI bus Any HP cables that meet SCSI specifications and any SCSI bus speed.
SCSI Ids Any
Shared
HP Rack Storage/12FC Required – D5991A
Host Bus Adapter
Model HP Fibre Channel Host Bus Adapter - D8602A
No. of HBAs 1
Driver Hhba5100.sys 1.12 or later
RAID level 0, 1,3, 5
Cabinet
RAID arrays Not more than 8 physical drives per logical array and not more than 8
LUNs are permitted per Rack Storage/12FC and Rack Storage/12
combination in a cluster.
No. of cabinets 1