HP Netserver LPr Installation Guide

Chapter 1 Setting Up the HP NetServer LPr
6
Mounting the LPr in a Rack
NOTE You may want to configure and test the NetServer LPr before
mounting it in the rack, or you may first mount it in the rack.
Mount the Server in
the Rack
Refer to the Installation Roadmap that comes
with the rack.
Use the template that comes with the mounting
hardware to determine rack nut and screw
location and order of attachment.
Refer to Chapter 9, "Mounting the NetServer in
the Rack," for a complete description of this
process.
Install the
Front Bezel
Do this after you have installed hard drives into
the hot-swap bays.
Refer to the Chapter 3 section, "Removing and
Replacing the Front Bezel."