HP Netserver LPr Installation Guide

Chapter 1 Setting Up the HP NetServer LPr
9
7) Read Configuration
Advisor
Configuration Advisor will appear. It provides
information on optimizing hardware
configuration and resource settings. It includes
notes on specific operating systems.
8) Configure
Integrated Remote
Assistant
If you plan to manage the HP NetServer LPr
remotely, refer to the HP NetServer Server
Management Reference Guide. Select
Configure Remote Management on the
Configure Remote Management screen to start
the utility that configures Integrated Remote
Assistant.
9) Configure Disk
Array
If you have a disk array, refer to the HP NetRAID
Series Installation and Configuration Guide. Select
Execute on the Configure Disk Array screen to start
the utility that configures the disk array.
10) Install the NOS
On the Create Driver Diskette(s) screen, select
Create Drivers Diskette(s).
On the Show NOS Installation Instructions screen,
select Save to Disk. Then print out the NOS
installation instructions from the disk. Read these
instructions before starting to install the NOS.
Follow the instructions on the screen and the
Network Operating System Installation Instructions
to perform the manual NOS installation.
11) HP NetServer
Management
Refer to the HP NetServer Management
Reference Guide to install HP TopTools.
12) Run DiagTool
(Optional)
To verify that the HP NetServer hardware is fully
functional, run DiagTool from the HP NetServer
Navigator CD-ROM. Select NetServer Utilities
from the HP Navigator main menu, and then
select DiagTool from the NetServer utilities
menu.